| General performance |
| 1. Digital memory : |
Digital memory shall be provided to memorized the VESA standard mode from horizontal frequency 30-70khz within specified. The following are factory per-set mode: |
| 640 ¡Ñ350 for 31.5khz/70Hz |
| 640 ¡Ñ400 for 31.5khz/70Hz |
| 640 ¡Ñ480 for 31.5khz/60Hz, 37.5khz/75Hz, 43.3khz/85Hz |
| 800 ¡Ñ600 for 37.8khz/70Hz, 46.9khz/75Hz |
| 1024 ¡Ñ768 for 60.0khz/75Hz, 68.67khz/85Hz |
| 2. Scanning Freq. : |
30KHz to 70KHz for horizontal frequency. |
| 50Hz to 150Hz for vertical frequency. |
| 3. Display Compatibility : |
IBM VGA adapter and compatibles. |
| Enhanced VGA display adapters. |
| Super VGA display adapters. |
| 4. Display Area : |
360mm ¡Ñ270mm default. |
| 5. Light Output: |
Brightness and contrast are set to maximum |
| A. 56 FL minimum at center. |
| (pattern : 75 ¡Ñ75 mm white window pattern) |
| B. 18 FL minimum at center (by ACL set up). |
| (pattern : full white). |
| 6. White Balance: |
CIE coordinates. x = 0.281 y = 0.311 (9300K) |
| 7. Power Input Voltage : |
AC 100v to 240v. 47Hz to 63Hz. |
| 8. Power Consumption : |
80w Maximum. |
| 9. Degaussing : |
Automatic degaussing and manual degaussing by OSD control. |
| 10. External Controls : |
Brightness, Contrast, Zoom, Horizontal position, Horizontal size, Vertical center, Vertical height, E-W pincushion, Trapezoid, Pin-Balance, Parallelogram, Rotation, Degaussing, Obiter on/off, OSD time out, H/V OSD position, Language choice, R-contrast, B-contrast, Video level (0.7vp-p/1.00vpp), Geometric correction.
Geometric Correction:
Horizontal moire, Vertical moire, Top corner correction, Bottom corner correction, Vertical ¡§S¡¨ correction, Vertical ¡§C¡¨ correction, Horizontal linearity ¡§C¡¨ correction. |
| 11. User Interface : |
Manual is displayed by ¡§OSD¡¨ menu, The function control key are adjusted level of selected items. |
| 12. On Screen Display : |
OSD window format are definite to appendix for OSD pattern. |
| 13. Auto Save : |
The monitor can automatically memorize all user adjustment when the OSD window disappear. If the timing you use is within the range of factor preset timing, all adjustment can remain. |
| 14. DDC : |
The monitor can support DDC 1/2B in case of using the 15 pin Min D-sub is connected. |
